Toshiba E-Studio 3511 showing error CF50.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tinnyjay
    Senior Tech

    500+ Posts
    • Oct 2009
    • 655
    #1

    Toshiba E-Studio 3511 showing error CF50.

    Hello
    Toshiba E-Studio 3511 is showing error code CF50.
    Changed,sensors,developers,LGC board and still the error is present again.
    I am ready to give up,please help me.
    Bye
    "Who loves the roses,must also bear thumbs"
    Tags: 351, 3511, code, e-studio, e-studio 35, error, error code, lgc, sensors, studio, toshiba, toshiba e-studio 3511
    • bellsysjoe
      Technician
      • Nov 2010
      • 12
      #2
      call me at 704-562-1543 will help with error code

        Comment

        • tinnyjay
          Senior Tech

          500+ Posts
          • Oct 2009
          • 655
          #3
          Originally posted by bellsysjoe
          call me at 704-562-1543 will help with error code
          What is this ?
          A Hot Line ?
          Lol
          "Who loves the roses,must also bear thumbs"

            Comment

            • bellsysjoe
              Technician
              • Nov 2010
              • 12
              #4
              I am a tech can help you with any problems

                Comment

                • tinnyjay
                  Senior Tech

                  500+ Posts
                  • Oct 2009
                  • 655
                  #5
                  Originally posted by bellsysjoe
                  I am a tech can help you with any problems
                  You want to increase your number of posts,only with these kind of posting.
                  Foolish
                  "Who loves the roses,must also bear thumbs"

                    Comment

                    • bellsysjoe
                      Technician
                      • Nov 2010
                      • 12
                      #6
                      Just trying to help you If you need the help call if not dont

                        Comment

                        • Mr Spock
                          Vulcan Inventor of Death

                          1,000+ Posts
                          • Aug 2006
                          • 2064
                          #7
                          Color auto-toner sensor abnormality: The connection of the color auto-toner sensor cannot be detected at the initialization, or the output value of color auto-toner sensor when the revolver starts rotating for initialization is out of a specified range.

                          Check the sensor (under the inner tray) and clean the grey patch with AIR only. Anything else will require replacement of the patch. Then run 05-207 and 05-208.
                          And Star Trek was just a tv show...yeah right!

                            Comment

                            • tinnyjay
                              Senior Tech

                              500+ Posts
                              • Oct 2009
                              • 655
                              #8
                              Originally posted by Mr Spock
                              Color auto-toner sensor abnormality: The connection of the color auto-toner sensor cannot be detected at the initialization, or the output value of color auto-toner sensor when the revolver starts rotating for initialization is out of a specified range.

                              Check the sensor (under the inner tray) and clean the grey patch with AIR only. Anything else will require replacement of the patch. Then run 05-207 and 05-208.
                              Sensors are changed 3-4 times,LGC board,developers,wires.
                              And i cannot enter 05 mode or 08.
                              Not so easy to do.
                              Never happened before like this.
                              "Who loves the roses,must also bear thumbs"

                                Comment

                                • Mr Spock
                                  Vulcan Inventor of Death

                                  1,000+ Posts
                                  • Aug 2006
                                  • 2064
                                  #9
                                  If you cannot enter 05 or 08 mode then I would flash the firmware. If that does not work replace the hard drive. If that does not fix it then it will probably be the system pwb.
                                  And Star Trek was just a tv show...yeah right!

                                    Comment

                                    • tinnyjay
                                      Senior Tech

                                      500+ Posts
                                      • Oct 2009
                                      • 655
                                      #10
                                      Originally posted by Mr Spock
                                      If you cannot enter 05 or 08 mode then I would flash the firmware. If that does not work replace the hard drive. If that does not fix it then it will probably be the system pwb.
                                      Solved,thank u
                                      "Who loves the roses,must also bear thumbs"

                                        Comment

                                        • digivision
                                          Technician
                                          • Aug 2009
                                          • 44
                                          #11
                                          hi dear fnd,
                                          i need e 351 c FW, can i have it?
                                          I have all other estudio fw & Sm

                                          BR,

                                            Comment

                                            • tinnyjay
                                              Senior Tech

                                              500+ Posts
                                              • Oct 2009
                                              • 655
                                              #12
                                              Originally posted by digivision
                                              hi dear fnd,
                                              i need e 351 c FW, can i have it?
                                              I have all other estudio fw & Sm

                                              BR,
                                              I dont have firmware for 351c.
                                              By the way you have all e-studio firmwares.
                                              Can you send e-studio 3511 to me please.
                                              I live in Europe
                                              tinnyjay@hotmail.com
                                              "Who loves the roses,must also bear thumbs"

                                                Comment

                                                Previous template Next
                                                Working...