service mode toshiba e studio 255 AND JAM

[avio2]

good mornig
i need a technical procedure for this model for adjust a registration adf

can someone tel me?

also i have some problem with jam in :
fuser unit but i have controlled a fuser unit and he's perfet ,
pre registration unit and i have noticed that the casing is curved at the step taken by roll pass he' s normal?
this machine have 86000 cpies
can someone tel me?

excuse me for possible errors but i'm a italian
tank's

ENRICO

[WildbillC]

Radf adj

Try this.....
Simplex copying:

Turn the power ON while pressing [0] and [5] simultaneously, key in [365] and then press the
[START] button.
(2) Enter the value.

Changing one value shifts the copy image by 0.2 mm.
(3) Press the [ENTER] button.
Duplex copying:
(1) Turn the power ON while pressing [0] and [5] simultaneously, key in [366] and then press the
[START] button.
(2) Enter the value.
Changing one value shifts the copy image by 0.2 mm.

(3) Press the [ENTER] button.

[ivovb]

What is the E____ code for Jam?

BR

[digivision]

hi dear fnd,
i wanna refill toner for e 255 machines.pls let me know the code for deactivate toner chip detection.
BR

[avio2]

Try this.....
Simplex copying:

Turn the power ON while pressing [0] and [5] simultaneously, key in [365] and then press the
[START] button.
(2) Enter the value.

Changing one value shifts the copy image by 0.2 mm.
(3) Press the [ENTER] button.
Duplex copying:
(1) Turn the power ON while pressing [0] and [5] simultaneously, key in [366] and then press the
[START] button.
(2) Enter the value.
Changing one value shifts the copy image by 0.2 mm.

(3) Press the [ENTER] button.

thank you
if possible you know the code for registration print paper?