toshiba e-studio16

[technician]

hello everybody

i am facing c95 in estudio 16.

any body help

thanks

[bauer]

Check the power supply fan to see if it's working.
C95Power supply unit fan motor abnormality
1.Check if each connector between the power supply unit fan motor and the relay PWA (CN50)
is disconnected.
2.Check if each connector between the relay PWA (CN21) and the main PWA (CN15) is dis-
connected.
3.Check if each connector pin is removed or the harness is broken.
4.Check if any conductor pattern on the relay and main PWA is open- or short-circuited.
5.Replace the power supply unit fan motor.
6.Replace the relay PWA.
7.Replace the main PWA.

[technician]

Thanks for reply Mr bauer

Sir i done all those thing which are u telling.
I have Toshiba estudio160 i am change relay PWA and main PWA but machine show F14
so what i can do in such situation.

[bauer]

F14Scanner unit FROM error
Was the main PWA replaced?
Download the scanner total count value into the main PWA in the setting mode (08-
388).
Was the scanner unit or scanner control PWA replaced?
Download the scanner total counter value of the main PWA into the scanner con-
trol PWA in the setting mode (08-389).
1.Check if each connector between the scanner control PWA (CN6) and the main PWA (CN8)
is disconnected.
2.Check if each connector pin is removed or the harness is broken.
3.Check if any conductor pattern on the scanner control and main PWA is open- or short-
circuited.
4.Replace the scanner control PWA.
5.Replace the main PWA.