If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I think I have used it only once. From what I remember it take a lot of steps and you don't get near the quality... but it did work. Basically you scan to e-file on the copier then use the utility to download those files, I think it does TIFF. HTH
I have everything you need posted on Ebay. My ebay user name is saveontoner-2008
I am offering print/scan enablers for really cheap. If you buy one the second is half off. I have a GM 2020 for your E-Studio 230 and a GM 2010 for your 350/450.
You can go to ebay or email me at saveontoner@gmail.com
Thanks
Can you help me reset printer and scannerto default?
I have usb key - gm 2010, now machine can not scanning and printing, mode 08 - 673 still 254.
What i must do?
All you have to do is power the equipment off, install the USB key near the back right, then power the equipment back on. The functionality should be there, if you were scanning/printing before with the trail period there is no need to change any codes/settings. 673 is only for the trail period, once it has been used (e.g. once you put in a number of days up to 60) it can not be used again... afaik. You do not have to use 673 in conjunction with an enabler.
Can you help me how can i use scanner?
I have usb key - gm 2010, now machine can not scanning but it is printing,
pls tel me how can i use scanner? thanks.
If you have the correct enabler, the hard "SCAN" button should turn green when pressed. Does the enabler have "2010" etched or did the seller just say it's a GM2010. If the scan button turns green then you are not setting up the scan correctly. Emujo
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
If you have the correct enabler, the hard "SCAN" button should turn green when pressed. Does the enabler have "2010" etched or did the seller just say it's a GM2010. If the scan button turns green then you are not setting up the scan correctly. Emujo
thanks 4 u'r reply.
i have all equipment. but trying to scan. machine is scanning. and save it. but who can i see my computer.
When I press "Scan" my scan button does NOT turn green I also have the GM-2010....I had my hard drive replaced a while back, and i've re-entered my email addresses.
Comment