Mac 10.5

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • acseong
    • Jun 2025

    #1

    [Misc] Mac 10.5

    I facing the problem on printing the mac to toshiba e2330c. The machine date just blinking without output. The software using to print is corel draw ver11. Mac I'm using is Ver10.5, the toshiba e2330c driver I download from toshiba website. Is that anyone facing this problem that can assist me...Urgent!!!
  • tstahlfsu
    Technician
    • Jan 2011
    • 21

    #2
    When you installed the printer on the Mac, did you put in a queue name? If not, remove the printer and re-add with a queue name of "print". This is an issue with the way the Toshiba internal print server works.. it is linux based and requires a queue name from another *nix based machine. Below is where I am talking about (It may look a bit different, as this is from Mac OSX Server)

    queue.jpg
    Last edited by tstahlfsu; 01-12-2011, 01:41 PM. Reason: Added inline image

    Comment

    • Meach
      Trusted Tech
      100+ Posts
      • Nov 2008
      • 128

      #3
      ? So reinstall the Toshiba using IP and give it a Queue name of "print" ?

      Comment

      • tstahlfsu
        Technician
        • Jan 2011
        • 21

        #4
        That's it! Was a major problem here on campus, until we figured it out :-)

        Comment

        • acseong

          #5
          Originally posted by tstahlfsu
          When you installed the printer on the Mac, did you put in a queue name? If not, remove the printer and re-add with a queue name of "print". This is an issue with the way the Toshiba internal print server works.. it is linux based and requires a queue name from another *nix based machine. Below is where I am talking about (It may look a bit different, as this is from Mac OSX Server)

          [ATTACH=CONFIG]7908[/ATTACH]
          I already tested too...But it seem like cannot work too. Is there any other way to solve this issues??

          Comment

          Working...