Toshiba e studio 20

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cmoney12051
    • Jun 2025

    #1

    [Misc] Toshiba e studio 20

    This is another machine I got from the hospital that was updating their systems. I want to use this copier as a printer. I see it has a parallel port on it. So I hooked it up to my computer and found some drivers online. But I can't get it to print. I see on the copier that it has a button called printer but whenever I press it it just beeps 3 times and stays on copier. Anyone know how to set it up as a printer?

    This is a previous post I made about a toshiba TF 631 I have. Any help on that would also be appreciated.



    I got this copier from a local hospital that is upgrading all their systems and was getting rid of the old stuff. So anyway this machine looks fine on the outside and starts up no problem. But whenever I try and make a copy it starts going crazy. It clicks and clicks and clicks so loud. And it wont stop untill I turn it off. Sounds like a jam but I haven't messed with it much. Any ideas what it could be? Any help is appreciated.


    Sent from my DROIDX using Tapatalk
  • ivovb
    Senior Tech

    500+ Posts
    • Apr 2008
    • 695

    #2
    Concerning eS20. Your version of machine is GDI. So download Toshiba Viewer from Toshiba America, Inc..

    BR
    I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

    Comment

    • cmoney12051

      #3
      Will downloading the viewer let me use it as a printer?

      EDIT: that did it. Thanks

      Sent from my DROIDX using Tapatalk

      Comment

      Working...