Error setting toner density

[Guest]

Hello.

I have e-studio 550/650 and I want to decrease its toner density in printing and copying (print and copy more lightly)
When I press in startup [0+8-414-4] for 0.8% lower toner, the toner density in printing is the same, does not change.

Is this the wright configuration for doing that?

Thank you in advance.

[tech-wazza]

After changing this setting you will need to run a number of test copies through the machine in order for the developer to adjust to the new setting.

[Claudio]

See your Service Handbook 05-501 through 05-515 ( The higher the value the darker the density ),
05-593 through 05-595 ( The higher the value the darker the density ).