Toshiba Studio 3500 CS40

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pukiro
    Technician

    50+ Posts
    • Feb 2011
    • 59

    #1

    [Error Code] Toshiba Studio 3500 CS40

    Hi guys
    please help me!, i am working on this machine studio 3500 and i have the code cs40, any idea on what is it...
    as im a ricoh engineer and dont really work on toshiba machines

    thanks
  • Meach
    Trusted Tech
    100+ Posts
    • Nov 2008
    • 128

    #2
    Im looking at the manual for the EStudio 3500c. I dont see that code listed. Are you sure it is a CS40 not CB40 or CA40 or C140 or C940 or CC40 or CE40 ?

    Comment

    • pukiro
      Technician

      50+ Posts
      • Feb 2011
      • 59

      #3
      hi meach
      i will check the code again...
      thanks for your reply.

      Comment

      • ToshibaTech
        Senior Tech

        500+ Posts
        • Apr 2007
        • 580

        #4
        If it is CE40 you probably have a depleted developer. Take all the imaging units apart, clean the charges and inspect them one by one.
        I will not give you service manuals or firmware.

        Comment

        • jonezy999
          just one copy??

          Site Contributor
          500+ Posts
          • Feb 2010
          • 952

          #5
          CB40???
          Does it have the booklet finisher installed? If so check the saddle stitch push plate mechanism and clock flags and sensors.
          I have not failed. I've just found 10,000 ways that won't work. ~Thomas Edison

          Comment

          Working...