Toshiba e-s 207 with fax GD-1220 Problem

[Guest]

hi to all,

I have a problem in fax transmission from toshiba MFP, when i send directly ( put paper in feeder then switch to fax mode then put the destination number and finaly start) it doesn't work and gives me on the status report NG and B0. but when i using the monitor it directly works and gives the OK status.

is there any setting must put on the MFP fax to let it works without using on hook monitor ?

[Gregg]

Is it a DSL line? Ive had problems like that. A digital line conditioner might cure it.

[Naveed Shahid]

Re: Toshiba e-s 207 with fax GD-1220 Problem

Dear

Same problem i am facing u solved already the problem can u share with me if u solved the problem

thanks

naveed

hi to all,

I have a problem in fax transmission from toshiba MFP, when i send directly ( put paper in feeder then switch to fax mode then put the destination number and finaly start) it doesn't work and gives me on the status report NG and B0. but when i using the monitor it directly works and gives the OK status.

is there any setting must put on the MFP fax to let it works without using on hook monitor ?

[lanagdaa]

Re: Toshiba e-s 207 with fax GD-1220 Problem

please check the setting for your country, do the following procedure 1. 0+2+Power ON 2.Code No.( 44) 3. Enter or Start .... wait warming up.