351C color quality

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • repeatcopiers
    Senior Tech

    Site Contributor
    500+ Posts
    • Sep 2008
    • 591

    #1

    351C color quality

    I have a estudio 351C that copies B/W fine, but on color, the toner is not cleaning off the transfer roller or transfer belt. The old transfer roller was falling apart so we did replace that but now have this problem.
  • ivovb
    Senior Tech

    500+ Posts
    • Apr 2008
    • 695

    #2
    Clean LSU's slit glass.
    Change transfer belt blade.

    BR
    I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

    Comment

    • WOETC

      #3
      I've had a few transfer belts playing up over the last few months (very hot humid summer), and find you must replace the cleaning blade at the same time. I suspect that is some of the cases of belts playing up the ozone filter has been blocked to some extent, and is not clearing the heat build up from the rear of the machine. and the rubber guide inside the transfer belt is suffering. - Theory only at this time.

      Comment

      • ivovb
        Senior Tech

        500+ Posts
        • Apr 2008
        • 695

        #4
        Give me a scanned sample.

        BR
        I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

        Comment

        • repeatcopiers
          Senior Tech

          Site Contributor
          500+ Posts
          • Sep 2008
          • 591

          #5
          Thanks, changed the transfer belt blade and all is well.

          Comment

          • ivovb
            Senior Tech

            500+ Posts
            • Apr 2008
            • 695

            #6
            You are wellcome.

            BR
            I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

            Comment

            Working...