E-Studio 250 Replace Drum Msg

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Blazer1087
    Trusted Tech

    100+ Posts
    • Nov 2010
    • 195

    #1

    E-Studio 250 Replace Drum Msg

    Hi every one, I dont work much on Toshibas but I took a call on one that the display said to replace the drum unit. Seemed easy enough. In the kit I ordered I got the drum and blade which I got replaced just fine. I also got a resistor which I'm guessing needs to be replaced to initialize the drum unit and turn off the message. I looked everywhere and could not find where it goes. Where is it hiding? Or can I do the initialize some other way to turn on the message? Thanks for any help.
  • Mr Spock
    Vulcan Inventor of Death

    1,000+ Posts
    • Aug 2006
    • 2064

    #2
    on top near the back of the unit.
    If the firmware is the latest check manual for changing from cru to sru then you can just reset the counters.
    And Star Trek was just a tv show...yeah right!

    Comment

    • Blazer1087
      Trusted Tech

      100+ Posts
      • Nov 2010
      • 195

      #3
      I will try that, thank you. I dont have this manuel, the only thing I have on Toshiba's is the intrevia but I will check that when I get in to the shop. Thanks again.

      Comment

      • Blazer1087
        Trusted Tech

        100+ Posts
        • Nov 2010
        • 195

        #4
        That worked,I was able to reset the drum counter. Thank you.

        Comment

        • jonezy999
          just one copy??

          Site Contributor
          500+ Posts
          • Feb 2010
          • 952

          #5
          08-673 should do the trick
          I have not failed. I've just found 10,000 ways that won't work. ~Thomas Edison

          Comment

          Working...