es810 enlarge problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jvargas
    Technician
    • May 2009
    • 44

    #1

    es810 enlarge problem

    Hi, I have st810, the problem is when I use this in 100%, no problem, in reduce no problem, but enlarge 110% or more, the scanner come to the left and don't move, and the copy go out blank, the lens stay desaligned, and I have to turn off and on to come back ready again, thanks. I changed the SLG BOARD, but nothing happen. the machine is working but the customer can't enlarge.
  • HASSAN
    Technician
    • May 2008
    • 43

    #2
    check moving Exp lamp unit and hompostion sinsoer and 2 scrow for moving at scan motoer

    Comment

    • jvargas
      Technician
      • May 2009
      • 44

      #3
      It works fine, because when you enlarge to 200% it moves to the right and then to the left to make a copy, with moved image

      Comment

      • michaelc
        Field Tech

        Site Contributor
        500+ Posts
        • Mar 2011
        • 590

        #4
        Will it enlarge over 110% from the document feeder? Or is this a problem with enlarging using the glass?
        It didn't say that I couldn't do it in the manual.

        Comment

        • jvargas
          Technician
          • May 2009
          • 44

          #5
          using the glass

          Comment

          Working...