If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
New Toshiba colour series eBridge-X (es4540c and es6550c Series)
Re: New Toshiba colour series eBridge-X (es4540c and es6550c Series)
Originally posted by sdrawkcab
The eb3 drivers work fine on the ebx unless you need specific ebx driver features.
The latest version ebx driver is an improvement on the first version, but I agree, some work still needed.
The EB3 Drivers are fine unless you want to use Department Codes in which case you need to use the EBX drivers.
However ONLY use Client CD 2.01 DO NOT USE 1.0 or 1.2 as these drivers are flawed.
So far we have installed many X-Mash machines and 1 X-BP with an X-BP-Pro to go in this week.
Also - Beware the Plugins on the Universal Driver. the driver works much better if you do not install the plugins.
Just noticed there is a new release (v2.12) have not tested it yet but will do.
It is also worth noting that with all Toshiba drivers you can not have two different versions of the same driver on a machine. If you plan to upgrade a driver the old one must be fully removed before the new one is installed.
Comment