[Misc] e-3530C - Fax Designation

[Moots30]

Is it possible to change incoming faxes to print to a finisher tray as opposed to the center tray area? I could not find anything in TopAccess nor could a find a service code to change the output tray for incoming faxes.

Any suggestions???

[Gregg]

08-930 output tray for fax printing. 0 inner/1finisher upper/2finisher lower.

[Moots30]

Thanks! Much appreciated.

[Moots30]

08-930 verifies the firmware level of the system. Any other ideas would be appreciated.

[sdrawkcab]

Gregg ment 1&3-930.

[Gregg]

Sorry bout that

[Moots30]

1&3???!!!! Don't want to do that. Anyone know of an 08 that will allow you to change fax printing to to finisher trays?

[Moots30]

Sorry guys! Thought 1&3 was a RAM clear. Looks like that is going to work. Thanks very much!