Recovery Gl-1010

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • PTAI
    Technician
    • Oct 2007
    • 38
    #1

    Recovery Gl-1010

    Everybody help me to repair my controler GL-1010.

    - I had checked the cdrom, hdd... everything ok.
    - I had dowloaded two file GL1020partv20 and GL1020recoveryv2125
    - I use WinRAR program to open them on two folders and copy all this files to two cds (one for GL1020partv20 168,748KB and one for GL1020recoveryv2125 )
    - I had conected computer monitor, keyboard, mouse to GL-1010
    - I power on the photo machine, put GL1010partv20 disk in the cdrom, The CDrom run this CD some seconds and GL-1010 reboot , reboot,... and reboot.

    I don't know Why didn't the cdrom run the partition cd (sets up and formats hd)?

    Guide me this proplem please !
    Tags: 101, 1010, 1020, act, gl-1010, gl-1020, gl1010, recovery, software, sys, system
    • Mr Spock
      Vulcan Inventor of Death

      1,000+ Posts
      • Aug 2006
      • 2064
      #2
      You can not do a straight copy of the iso files they need to be burned using a program that supports iso's. When you copy you do not get the boot section written to the cd's.
      After burning the cd's install the partition cd and wait until the cd is done "reboot" is on the screen, then eject the cd put the recovery in and then reboot the machine and wait about 30-45 minutes until it says reboot. It should be fine but will take 45 minutes on the first reboot to initialize everything.
      And Star Trek was just a tv show...yeah right!

        Comment

        • PTAI
          Technician
          • Oct 2007
          • 38
          #3
          help me!

          Dear mr Spock!

          I tried, can you show to me some the programs to be used to burn the iso files to cd's

          Thank you very much

          Originally posted by Mr Spock
          You can not do a straight copy of the iso files they need to be burned using a program that supports iso's. When you copy you do not get the boot section written to the cd's.
          After burning the cd's install the partition cd and wait until the cd is done "reboot" is on the screen, then eject the cd put the recovery in and then reboot the machine and wait about 30-45 minutes until it says reboot. It should be fine but will take 45 minutes on the first reboot to initialize everything.

            Comment

            • PTAI
              Technician
              • Oct 2007
              • 38
              #4
              sevice e450?

              Hi Mr Spock!!

              i have had some toshiba e 350, 450 machinese but i haven't had service manual them, can you show to me where do i seek it ?

                Comment

                • huh.nguyen
                  Junior Member
                  • Feb 2010
                  • 6
                  #5
                  can you send link download two file GL1020partv20 and GL1020recoveryv2125 for me. I send for you service manual e350 and 450

                    Comment

                    • huh.nguyen
                      Junior Member
                      • Feb 2010
                      • 6
                      #6
                      can you send link download two file GL1020partv20 and GL1020recoveryv2125 for me. I send for you service manual e350 and 450
                      mail: hieuminhthuan@gmail.com

                        Comment

                        • JustManuals
                          Field Supervisor

                          5,000+ Posts
                          • Jan 2006
                          • 9838
                          #7
                          I have the GL-1020 Recovery CD's. The cost is $35.00 if interested, email me.

                          Paul@justmanuals.com

                            Comment

                            • serginho_vl
                              Technician

                              50+ Posts
                              • Sep 2007
                              • 59
                              #8
                              If you need the system software for the GL-1010 / GL-1020 - contact me.

                                Comment

                                • emujo
                                  Field Supervisor

                                  2,500+ Posts
                                  • Jun 2009
                                  • 3009
                                  #9
                                  If you have access to the FYI site, then use what Toshiba offers..a program called Deep Burner. Works very well for burning these ISO images. Emujo
                                  If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                                    Comment

                                    • sameervirus
                                      #10
                                      Hi guys please can send me the link for recovery cd
                                      sameer.nabil@gmail.com

                                        Comment

                                        Previous template Next
                                        Working...