Please Wait msg in Toshiba e-165

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sjinachandran
    • Jun 2025

    #1

    Please Wait msg in Toshiba e-165

    Dear firends,
    I have face the problum of "please Wait" on display, even i have replaced the mother board pcb(logic pcb) still the problum not solved. expecting the suggestion to solve the problum.

    S.Jinachandran
  • michaelc
    Field Tech

    Site Contributor
    500+ Posts
    • Mar 2011
    • 590

    #2
    Does it constantly display 'wait' from booting up?
    It didn't say that I couldn't do it in the manual.

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

      Just Manuals | The Internet's largest selection of manuals | Instant Downloads

      Paul@justmanuals.com

      Comment

      • CCS
        Trusted Tech

        Site Contributor
        250+ Posts
        • Feb 2008
        • 266

        #4
        try putting a new toner cartridge in

        Comment

        • dogg_man
          Technician
          • Jun 2011
          • 48

          #5
          Do a 08-686 then turn the machine off using the power button after it completes, DO NOT PRESS THE 'CLEAR/STOP' BUTTON, just turn the machine off straight away after performing the 08-686. If that does not work do 08-669 and again turn the machine off after it completes, DO NOT PRESS THE 'CLEAR/STOP" BUTTON, just turn the machine off straight away after it completes.

          Comment

          • Harry
            Trusted Tech

            100+ Posts
            • Feb 2009
            • 228

            #6
            Hold 1 3 * turn Machine one this clears all Mem and Machine works again

            Reguards Harry

            Comment

            • sjinachandran

              #7
              Re: Please Wait msg in Toshiba e-165

              Tku for reply friends, now i removed the network (optional) box, now machine works fine, how to rectify the network printer board, is it anything related with 128 DDR ram, is it compitable with normal DDR RAM, both mother board and network printer card is new one, is it required and setup?
              Last edited by Guest; 07-01-2011, 07:30 AM. Reason: adding aditional information

              Comment

              • Harry
                Trusted Tech

                100+ Posts
                • Feb 2009
                • 228

                #8
                Re: Please Wait msg in Toshiba e-165

                Hold down start stop and switch on machine with the too keys pressed!! After that there must be Ready in the display. Make 08 669 and the machine have to work again Other thing is the country code in 02 make shure to put right code in there
                good Luck
                Harry

                Comment

                • sjinachandran

                  #9
                  Re: Please Wait msg in Toshiba e-165

                  tku for reply freinds, I tried with start and stop keys but no result, is it related with RAM used in this network unit, if so is it normal DDR ram or different one, and also how to get the country code?

                  Comment

                  • Toshitec
                    MFP Engineer
                    • May 2011
                    • 22

                    #10
                    Re: Please Wait msg in Toshiba e-165

                    You can try to change te CF-card in the net-controller (TDK brand)
                    In the past years I have changed few of them with good result.
                    Good luck

                    Comment

                    Working...