OS GL-1010

[PTAI]

Hi everybody!

the OS version 2.4.20-28.7-d and the OS version 2.4.31-1.33-b
please guide me to know, what 's a new OS version of GL-1010 !!

[Mr Spock]

GL-10x0 v2.3.9.11 is the newest version and was just released on 12/18/07 it offers support for Vista. The only way to get this is to down load the cd iso's from Toshiba and burn cd's

[PTAI]

where' os

hi mr Spock!

I have just loged in the toshiba wed but i don't look at this new version!! can you guide clearly me where do i download this version?

thank a lot again

GL-10x0 v2.3.9.11 is the newest version and was just released on 12/18/07 it offers support for Vista. The only way to get this is to down load the cd iso's from Toshiba and burn cd's

[Mr Spock]

Log into FYI.TOSHIBA.COM goto tech-to-go/ product info/ b&w controller/gl1010 on that page near the top is

CDs for Version 2.3

click the link to the left and it will take you to a screen to download the cd's.

[PTAI]

not member

hello Mr Spock!

I'm not the member of FYI so i can't log in . Have you different way?

Thanh for help me.

Log into FYI.TOSHIBA.COM goto tech-to-go/ product info/ b&w controller/gl1010 on that page near the top is

CDs for Version 2.3

click the link to the left and it will take you to a screen to download the cd's.

[Mr Spock]

I only have access to fyi but it should be on your website somewhere. Look for a iso image file or system software under the gl-1010 section. It is labeled recovery and partition. Of the ones you listed I would use the second if that is all you can find. The one I showed was only released this week.

[PTAI]

last question

Dear Spock!

Thank you very much for all,

last different question, please help me againt!

I am needing Winblows NT OS, where must i download?.

Sincerely your.

[Mr Spock]

Look for version 1.x.x of the system software. They had so many issues with it they moved over to a "unix" flavor and it runs much better and adds scanning for free. I would not use the NT variety just down load the newest drivers as well and it will be well worth the time spent downloading.

[PTAI]

Because small HDD

Dear Spock!

Yes, I Know ! the newest version had added free scanning program and I used this version it's viery well . But the GL1020partv20 can not support of small HDD (smaller 40GB HDD), I tried to setup many times.

Have you had any OS Version which to be used small HDD. I needn't scanning program because i had the scan dongle.

Thank you for guide me !

Look for version 1.x.x of the system software. They had so many issues with it they moved over to a "unix" flavor and it runs much better and adds scanning for free. I would not use the NT variety just down load the newest drivers as well and it will be well worth the time spent downloading.

[nhatthuc0000]

don,t worry

are you try on change the controller hard disk ???.i did setup sucess on a 20GB Quatum harddisk.
gool luck to u!!!!!

[PTAI]

thanks

Ok
I was done them yesterday

are you try on change the controller hard disk ???.i did setup sucess on a 20GB Quatum harddisk.
gool luck to u!!!!!