Advance thanks to all .........now i recently installed 1 e studio 166 model ..customer asked for the passward,,,but i don:t no ,how to give the passward............ple help me...........\\thankssss.........
-
-
Hi.
eStudio 166 is same with eStudio 163. you can use same way as in eStudio 163. by the way in eS166, it doesn't has password but access code 3 digit.
regards -
PASSWARD
Thankyou For Information.but I Don"t Know How To Give The Passward To Estudio 163...please Help Me...thanksComment
-
try 08-263Comment
-
thankyou verymuch...i will try this code.Comment
-
MSHADroo
press [1] and [*] togheter and then turn on the copier after the beep enter 100 then [start] type 18 then [start] press [200%] twice then type 100 and then [interupt] and then turn off copier ,whit this code department controll function will be turn on.
now press [8] and [start] togheter and turn on copier enter your code and then press [interupt] and turn off your copier . now turn on your copier normally and enjoy from security!!!
for more information see this complete refrence:
Comment
Comment