Adding Fax to a 281c

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • repeatcopiers
    Senior Tech

    Site Contributor
    500+ Posts
    • Sep 2008
    • 591

    #1

    Adding Fax to a 281c

    I have a customer with a 281c and they want to add fax. I have a 451c in the shop w/fax......can I take it off the 451 and add to the 281, if so, what do I need to take off?

    Thanks
  • sdrawkcab
    Confused & Bewildered

    250+ Posts
    • Jun 2009
    • 317

    #2
    Re: Adding Fax to a 281c

    Take off the back cover, the fax is in the top left corner with a ribbon cable going to the system board, thats what you need to remove.
    Some days, it's just not worth chewing through the restraints

    Comment

    • repeatcopiers
      Senior Tech

      Site Contributor
      500+ Posts
      • Sep 2008
      • 591

      #3
      Re: Adding Fax to a 281c

      Thanks, much appreciated!

      Comment

      • emujo
        Field Supervisor

        2,500+ Posts
        • Jun 2009
        • 3009

        #4
        Re: Adding Fax to a 281c

        initialize fax after installing or you may see tx/rx problems. Emujo
        If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        • repeatcopiers
          Senior Tech

          Site Contributor
          500+ Posts
          • Sep 2008
          • 591

          #5
          Re: Adding Fax to a 281c

          Originally posted by emujo
          initialize fax after installing or you may see tx/rx problems. Emujo
          Is that done like the old estudio 35.......was it *1 while powering up, then 100?

          Comment

          • emujo
            Field Supervisor

            2,500+ Posts
            • Jun 2009
            • 3009

            #6
            Re: Adding Fax to a 281c

            correct
            If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

            Comment

            • repeatcopiers
              Senior Tech

              Site Contributor
              500+ Posts
              • Sep 2008
              • 591

              #7
              Re: Adding Fax to a 281c

              Originally posted by emujo
              correct
              Thank you.

              Comment

              Working...