e-studio 6520c jamming

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Mark B
    Trusted Tech

    100+ Posts
    • Jul 2006
    • 153
    #1

    e-studio 6520c jamming

    I have a 6520c that is jamming from the tray with thick paper. I set the paper type to thick 1,2,and 3. still jamming. One thing that I noticed is that the tire tread is going the wrong direction. I got a new set (PM kit sec. roll) looked at the direction of the tread and it is backwards has anyone noticed this? This is the only Toshiba model that I work on.
    Tags: jamming, kit, model, paper, roll, set, studio, toshiba, type, work
    • Travis06
      Tech.

      100+ Posts
      • Feb 2008
      • 193
      #2
      Re: e-studio 6520c jamming

      What jam code are you getting? E0??

        Comment

        • Mark B
          Trusted Tech

          100+ Posts
          • Jul 2006
          • 153
          #3
          Re: e-studio 6520c jamming

          I do not remember the code. The paper does not leave the drawer. I got a new set of tires and I took the feed and take up off of the collars turned them around and having one of my techs put them on today.

            Comment

            Previous template Next
            Working...