Adding toner symbole e-163

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sjinachandran
    • Jun 2025

    #1

    Adding toner symbole e-163

    Dear friends,
    I have replaced the genune Toner in toshiba e-163, still it shows adding toner symbole, also i tried with other toners, but the problum not solved. where to check with machine.
    Regards
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: Adding toner symbole e-163

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

    Paul@justmanuals.com

    Comment

    • Outlander
      Technician
      • Sep 2011
      • 34

      #3
      Re: Adding toner symbole e-163

      Problem can be at contacts for toner chip. Try to look inside machine where toner chip goes.
      Second solution is to switch off genuine toner chip recognition in service mode.

      Comment

      • bojans
        Service Manager

        Site Contributor
        1,000+ Posts
        • Feb 2008
        • 1313

        #4
        Re: Adding toner symbole e-163

        As I remember set 08-695 to 0

        Comment

        • Outlander
          Technician
          • Sep 2011
          • 34

          #5
          Re: Adding toner symbole e-163

          Originally posted by bojans
          As I remember set 08-695 to 0
          Yes. That's good to. To disable genuine toner chip checking.

          Comment

          Working...