If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
the HDD to be used is the conventional IDE used in normal PCs,
remove the old one,be aware for the jumpers settings (CS,master) will work.
install the new HDD and then apply the firmware upgrade procedure.
if you don't have the right procedure just send me your mail.
good luck!
----------------------------- Be happy for a moment - this moment is your life. Omar Khayyam -----------------------------
the HDD to be used is the conventional IDE used in normal PCs,
remove the old one,be aware for the jumpers settings (CS,master) will work.
install the new HDD and then apply the firmware upgrade procedure.
if you don't have the right procedure just send me your mail.
good luck!
Comment