E 712 JAM RADF

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ELIAS G
    Technician
    • Jun 2011
    • 14

    #1

    E 712 JAM RADF

    Hi everybody from ATHENS
    E 712 JAM RADF on a STUDIO 280.I CHANGED THE REGISTRATION SENSOR AND ALL THE SENSORS. I CLEAN CAREFULY REFLECTORS .
    I HAVE TESTING THE RADF PC BOARD ON ANOTHER RADF AND IT IS WORKING PERFECTLY.
    ANY IDEAS ?
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: E 712 JAM RADF

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Comment

    • michaelc
      Field Tech

      Site Contributor
      500+ Posts
      • Mar 2011
      • 590

      #3
      Re: E 712 JAM RADF

      I am assuming it is an MR-3018. Have you checked the sep roller for a flat in the ADF or changed the ADF rollers?
      It didn't say that I couldn't do it in the manual.

      Comment

      • siriopev

        #4
        Re: E 712 JAM RADF

        ΚΑΛΗΜΕΡΑ ΦΙΛΕ ΔΟΚΙΜΑΣΕ ΝΑ ΒΓΑΛΕΙΣ ΑΝΤΙΓΡΑΦΟ ΜΕ ΠΡΩΤΟΤΥΠΟ Α4-r ΑΠΟ radf.
        An ΒΓΑΖΕΙ ΚΑΝΟΝΙΚΑ ΤΟΤΕ ΘΑ ΠΡΕΠΕΙ ΝΑ ΕΙΝΑΙ ΜΗΧΑΝΙΚΟ ΠΡΟΒΛΗΜΑ ΤΟΥ radf.
        ΨΑΚΤΟ ΛΙΓΟ.

        Comment

        • ELIAS G
          Technician
          • Jun 2011
          • 14

          #5
          Re: E 712 JAM RADF

          Hi from ATHENS,
          To michaelc: I changed the rollers and the probleb stays.Thanks
          To siriopev:ευχαριστω φιλε,θα το δοκιμασω μετα τα χριστουγεννα.Καλες γιορτες

          MERRY CHRISTMAS to all

          Comment

          • patwilf
            Service Technician
            • Nov 2009
            • 41

            #6
            error

            Change 05-354 from 10 to 15. 20 Max. This changes how far the original feeds into the Radf. That has helped me on the mr3021

            Comment

            • Dredd
              Technician
              • Feb 2012
              • 17

              #7
              Re: E 712 JAM RADF

              When i change any sensor in the RADF I always execute the code 05-356 (Automatic adjustment of RADF sensor and EEPROM initialization), then 05-367 (Set width Min) and 05-368 (Set width Max).

              Jason

              Comment

              Working...