toshiba e-163 unable to install a driver in computer

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sjinachandran
    • Jun 2025

    #1

    toshiba e-163 unable to install a driver in computer

    Dear firends,

    I try to install the toshiba e-163 driver, but i unable to install, while instalation the message shows some of the files are missing, but i tryed with orginal CD, i also try with another system with another driver CD but the trail is vain, i faced the same problum. how can i solve the problum.

    S.JINACHANDRAN
  • Outlander
    Technician
    • Sep 2011
    • 34

    #2
    Re: toshiba e-163 unable to install a driver in computer

    Not enough info for right solution

    Usually if you have original CD Toshiba Viewer, it runs installation via Autorun. After few steps you must put USB cable into e-STUDIO and Tur on the machine. Installation will be completed.

    Which way you use for installlation- CD autorun, add printer, doubleclick exe?!?!?
    What OS do you have?

    Comment

    • sjinachandran

      #3
      Re: toshiba e-163 unable to install a driver in computer

      i download the driver from toshiba network, and installed those driver. but the system shows some files are missing and shows "please insert driver cd". Then how can i installe the firmware for this 163 machine without network card.

      Comment

      • Outlander
        Technician
        • Sep 2011
        • 34

        #4
        Re: toshiba e-163 unable to install a driver in computer

        Originally posted by sjinachandran
        i download the driver from toshiba network, and installed those driver. but the system shows some files are missing and shows "please insert driver cd". Then how can i installe the firmware for this 163 machine without network card.
        Usually you will be able to download complete CD from web cca 315MB (Toshiba Viewer 2.0), it'sISO image. Burn disc and try to install.
        For Firmware upgrade, on models 163/166/203/206/181/211 and 165/167/205/207/237/182/212/242 without Network Controller, you will need a Special Software Upgrade Tool.

        Comment

        • didi2005
          Trusted Tech

          250+ Posts
          • May 2011
          • 401

          #5
          Re: toshiba e-163 unable to install a driver in computer

          Below is how i install driver:

          1. Connect usb cable from MFP to PC
          2. On the MFP, and your PC will detect new hardware
          3. Install the USB driver
          4. Once the USB driver is finish install, it will auto go to driver installation, just follow the on screen instruction

          Comment

          Working...