Toner sensor disable for E-studio 181

[bitels85]

Re: Toner sensor disable for E-studio 181

It is probably the waste toner sensor. Check to see if the toner waste container is full. There is a sensor that halts the copier if the waste toner fills to a certain point.

WHAT WASTE TONER SENSOR???? This model doesn't have waste toner container!!!

[toantam]

Re: Toner sensor disable for E-studio 181

Dear Sir!
First you haave to use 0+8 key in 971 set 0 to 3
then 0+8 key in 695 set 1 to 0
If you need SH e studio 181-211 give me your email.
Good luck.

[lenatec]

Re: Toner sensor disable for E-studio 181

0-8/ 971 set to 3 that`s good

[lenatec]

Re: Toner sensor disable for E-studio 181

sorry, 0-8/ 791 set to 3

[etsmultan]

Re: Toner sensor disable for E-studio 181

dear, you can try the code 0/5-971 set to 3 in order to disable the toner for e-181, e-211, e-212 good luck for you

dear have you tried it?

Re: Toner sensor disable for E-studio 181

Small mistake. It's not 05 it's 08/971 Toner near empty threshold value

Is that code solve the problem or not, coz i have the same problem with this genuine toner. And my boss still asking why this can be happen.

[Outlander]

Re: Toner sensor disable for E-studio 181

dear, you can try the code 0/5-971 set to 3 in order to disable the toner for e-181, e-211, e-212 good luck for you

Small mistake. It's not 05 it's 08/971 Toner near empty threshold value

[lenatec]

Re: Toner sensor disable for E-studio 181

dear, you can try the code 0/5-971 set to 3 in order to disable the toner for e-181, e-211, e-212 good luck for you

[didi2005]

Re: Toner sensor disable for E-studio 181

Toshiba purposely added the chip to toner to prevent non-genuine 3rd party toners...

[sneaky41]

Re: Toner sensor disable for E-studio 181

sorry for question, but did you tried with that 08/695 code on e181 machine? Unfortunately I don't have machine to try. From time to time, Toshiba releases a new version of Service handbooks with new codes (hidden codes). In some European countries it's forbidden by law to push end user to buy just specially toners and cartridges from just one producer. So it must be somewhere...

we have these models with updated firmwares. we have tried the 08-695 before and it does not work. just in case you find the hidden code to disable the toner chip, i'l be happy too.

[Outlander]

Re: Toner sensor disable for E-studio 181

yes, 08-695 was removed after the e163/166. it does not work with e181. The chip for e181 limits the use of toners to Original toners only and for specific region. If your unit is Asia version, you cannot use toners purchased from european or USA market, if your unit is from USA, you cannot use toners from Asia etc.

sorry for question, but did you tried with that 08/695 code on e181 machine? Unfortunately I don't have machine to try. From time to time, Toshiba releases a new version of Service handbooks with new codes (hidden codes). In some European countries it's forbidden by law to push end user to buy just specially toners and cartridges from just one producer. So it must be somewhere...

[sneaky41]

Re: Toner sensor disable for E-studio 181

There's no info about it at Service handbook, but at series before 181 (163/166) we could do that through 08/695 code (from 1 to 0). Function of that code is:Checks whether the toner cartridge is inserted or not.
You can try it.

yes, 08-695 was removed after the e163/166. it does not work with e181. The chip for e181 limits the use of toners to Original toners only and for specific region. If your unit is Asia version, you cannot use toners purchased from european or USA market, if your unit is from USA, you cannot use toners from Asia etc.

[Outlander]

Re: Toner sensor disable for E-studio 181

There's no info about it at Service handbook, but at series before 181 (163/166) we could do that through 08/695 code (from 1 to 0). Function of that code is:Checks whether the toner cartridge is inserted or not.
You can try it.

[sneaky41]

Re: Toner sensor disable for E-studio 181

the toner of the e181 has a chip which is recognized by the machine. you can see this at the rear side of the toner cartridge.

does this third party toner have this chip? if not, you can try transferring the chip or maybe play around with the region setting.

[dmammen]

Re: Toner sensor disable for E-studio 181

It is probably the waste toner sensor. Check to see if the toner waste container is full. There is a sensor that halts the copier if the waste toner fills to a certain point.