eStudio 205

[iscott]

Anyone have detailed instructions on how to set these machines to DHCP?
Its set to static but when I change it to DHCP I cant get it to stick.
It resets to Static.

[TheOwl]

Re: eStudio 205

The normal process from the control panel is:

1. User Functions
2. Admin Mode
3. Network
4. TCP/IP
5. Dynamic
6. Return
7. Apply Now

The process from the Web interface is:

1. Open web interface
2. Admin
3. Netowrk
4. TCP/IP
5. Set to Dynamic
6. Save
7. Save at the top of the page.

If these still don't work, then you will need to do a NIC initialize from service mode.