E-Studio 232 FIRMWARE
Collapse
X
-
Re: E-Studio 232 FIRMWARE
after format the harddisk to FAT file system,
load the files to FAT formatted flashdrive and press 9+4 key &power on
But it ask like this. what to do Bro.
20230727_190924[1].jpg
or did I do any mistake
Pls advice me
Thanks.Comment
-
Re: E-Studio 232 FIRMWARE
In my hard disk is 40GB and has 21 partition
I delete all partition and create 3 , 2 GB partition and format with FAT (not fat32)
load 16GB flash dive with FAT formatted
9+4 =power then I got
pc1.JPG
after few seconds it display
pc2.jpg
But not going to this page to update
PC3.JPG
How to fix this problem.
Also Sir ,The file you sent to me has this files
pc4.JPG
Could you please advice me Bro
Thanks.Comment
-
Re: E-Studio 232 FIRMWARE
In my hard disk is 40GB and has 21 partition
I delete all partition and create 3 , 2 GB partition and format with FAT (not fat32)
load 16GB flash dive with FAT formatted
9+4 =power then I got
[ATTACH=CONFIG]59096[/ATTACH]
after few seconds it display
[ATTACH=CONFIG]59097[/ATTACH]
But not going to this page to update
[ATTACH=CONFIG]59098[/ATTACH]
How to fix this problem.
Also Sir ,The file you sent to me has this files
[ATTACH=CONFIG]59099[/ATTACH]
Could you please advice me Bro
Thanks.
hi bro,
for sure, You should need to use the 8Gb USB or lower capacity.Comment
-
Comment
-
Re: E-Studio 232 FIRMWARE
Howdy, just wondering if someone who has access to firmware for the E-Studio 232 would be kind enough to share those firmware files with a fellow technician (I'm a Konica guy so I don't have access to Toshiba firmware) either by Dropbox or some other method. What I need are the files for what Toshiba calls the "System ROM", and also the files for updating the "HDD Program and UI Data". Or, if someone can direct me somewhere reliable where I can find the correct files on my own that would work tooAny help is greatly appreciated!!
If interested, contact me via email at whatsapp 84945948548 and email : kudoshin1994@gmail.comComment
-
-
-
Re: E-Studio 232 FIRMWARE
it should be "232_282".
please follow step by step on the service manual.Comment
-
Re: E-Studio 232 FIRMWARE
Folder name 202_282 and try with 4GB flash drive
So I need to change folder name and try
Ok Sir.
I will update it
ThanksComment
-
Re: E-Studio 232 FIRMWARE
Howdy, just wondering if someone who has access to firmware for the E-Studio 232 would be kind enough to share those firmware files with a fellow technician (I'm a Konica guy so I don't have access to Toshiba firmware) either by Dropbox or some other method. What I need are the files for what Toshiba calls the "System ROM", and also the files for updating the "HDD Program and UI Data". Or, if someone can direct me somewhere reliable where I can find the correct files on my own that would work tooAny help is greatly appreciated!!
Comment
-
Comment
-
Comment
Comment