Toshiba RADF MR-3016 - help identifying part

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sambo
    Technician

    50+ Posts
    • May 2011
    • 60

    #1

    Toshiba RADF MR-3016 - help identifying part

    Good morning,
    I am having difficulty identifying a part on an MR-3016, and I cannot seem to find it in the service manual.

    It is a thin clear plastic part, that is located under the Platen Guide and between the white plastic tabs.
    The attached picture shows with red arrows what I am referring to. (The thin plastic part, not the white plastic tabs)

    photo.JPG

    The part has become torn slightly, and now paper is getting stuck on it.

    If somebody could help identifying it I would be very appreciative.
  • Meach
    Trusted Tech
    100+ Posts
    • Nov 2008
    • 128

    #2
    Re: Toshiba RADF MR-3016 - help identifying part

    6LA95764000 Mylar

    Comment

    • sambo
      Technician

      50+ Posts
      • May 2011
      • 60

      #3
      Re: Toshiba RADF MR-3016 - help identifying part

      Originally posted by Meach
      6LA95764000 Mylar
      Ah, thanks very much Meach.

      Unfortunately searching that part number doesn't display any images, but I will take your word for it and track down a supplier of the part.

      Thanks again.

      Comment

      • bauer
        Technician

        50+ Posts
        • May 2007
        • 72

        #4
        Re: Toshiba RADF MR-3016 - help identifying part

        I don't bother replacing them, all I do is cut the damaged tabs off top to bottom and solves my jam problems

        Comment

        • Meach
          Trusted Tech
          100+ Posts
          • Nov 2008
          • 128

          #5
          Re: Toshiba RADF MR-3016 - help identifying part

          Here is a print out. Look at item 2
          Attached Files

          Comment

          • sambo
            Technician

            50+ Posts
            • May 2011
            • 60

            #6
            Re: Toshiba RADF MR-3016 - help identifying part

            Originally posted by bauer
            I don't bother replacing them, all I do is cut the damaged tabs off top to bottom and solves my jam problems
            Hi Bauer, yes i've managed to shave off some of the sharp edges and use some sticky tape to repair a major tear, and it is currently working OK.

            I will order the part as i'm not sure how long my patch up job will last!

            Comment

            • sambo
              Technician

              50+ Posts
              • May 2011
              • 60

              #7
              Re: Toshiba RADF MR-3016 - help identifying part

              Originally posted by Meach
              Here is a print out. Look at item 2
              That is exactly it, thanks mate!

              Comment

              Working...