Toshiba 3560 error e01 please help!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • koaslosa
    Technician
    • Apr 2011
    • 28

    #1

    [Error Code] Toshiba 3560 error e01 please help!!

    Hi guys,
    I have a toshiba 3560 and it gives me an error e01.
    I literally have changed everything to the board , transfer ,sensors, fuser everything and it stills gives that same error

    Any suggestions?
  • ESTANISLAOWENENTON

    #2
    Re: Toshiba 3560 error e01 please help!!

    thissensorisstuckinthelcc
    lccopenatthe topblackouttoashutter
    if not,removecover andpositiontheshutter

    Comment

    • koaslosa
      Technician
      • Apr 2011
      • 28

      #3
      Re: Toshiba 3560 error e01 please help!!

      Originally posted by ESTANISLAOWENENTON
      thissensorisstuckinthelcc
      lccopenatthe topblackouttoashutter
      if not,removecover andpositiontheshutter
      Iam sorry to bother you but i didnt completely understand you.
      Which sensor you mean and what is the lcc?
      do you mean change the exit sensor?

      Thanks for your reply!!!

      Comment

      • JustManuals
        Field Supervisor

        5,000+ Posts
        • Jan 2006
        • 9838

        #4
        Re: Toshiba 3560 error e01 please help!!

        This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

        Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

        Paul@justmanuals.com

        Comment

        • michaelc
          Field Tech

          Site Contributor
          500+ Posts
          • Mar 2011
          • 590

          #5
          Re: Toshiba 3560 error e01 please help!!

          I would probably get a new machine rather than trying to repair this one. This is a really old model.
          It didn't say that I couldn't do it in the manual.

          Comment

          • ESTANISLAOWENENTON

            #6
            Re: Toshiba 3560 error e01 please help!!

            Originally posted by koaslosa
            Iam sorry to bother you but i didnt completely understand you.
            Which sensor you mean and what is the lcc?
            do you mean change the exit sensor?

            Thanks for your reply!!!
            Large capacity casset letter

            has a shutterin the top half of black

            Comment

            • koaslosa
              Technician
              • Apr 2011
              • 28

              #7
              Re: Toshiba 3560 error e01 please help!!

              nothing guys.
              This machine will drive me crazy.

              Any other opinions?

              Comment

              • michaelc
                Field Tech

                Site Contributor
                500+ Posts
                • Mar 2011
                • 590

                #8
                Re: Toshiba 3560 error e01 please help!!

                Are you getting a good power supple to the machine? Have you used a logic probe to check the sensor is working?
                It didn't say that I couldn't do it in the manual.

                Comment

                • koaslosa
                  Technician
                  • Apr 2011
                  • 28

                  #9
                  Re: Toshiba 3560 error e01 please help!!

                  Originally posted by michaelc
                  Are you getting a good power supple to the machine? Have you used a logic probe to check the sensor is working?
                  Yes.I also tested the pcb and power supply board to another machine and they are working.Which sensor do you mean?

                  Comment

                  • michaelc
                    Field Tech

                    Site Contributor
                    500+ Posts
                    • Mar 2011
                    • 590

                    #10
                    Re: Toshiba 3560 error e01 please help!!

                    E01 is the exit sensor. I would check that one out.
                    It didn't say that I couldn't do it in the manual.

                    Comment

                    Working...