Old Toshiba 1307 analog; DARK copies

[dunnbiz]

Just cleaned an old 1307 that was dark and streaky... Cleaned it well and restrung charge corona, but has generic toner in it and has made copier run dark copies... You must set manual exposure on lightest to get a good copy. Can anyone tell me the codes to turn off auto exposure or the codes to lighten up the manual exposure... I imagine this is done through the keyboard. Thanks.

[lucky777]

Re: Old Toshiba 1307 analog; DARK copies

Did you clean the optics?

[mo0651]

Re: Old Toshiba 1307 analog; DARK copies

You mean 1370? You can adjust the shading plates.

[dunnbiz]

Re: Old Toshiba 1307 analog; DARK copies

Did you clean the optics?

Yes, removed drum and cleaned everything well... I'm looking for the adjustment to raise exposure intensity if any one knows this. Customer started using generic toner, and that caused the darkened cops.

[dunnbiz]

Re: Old Toshiba 1307 analog; DARK copies

You mean 1370? You can adjust the shading plates.

Yes, thanks, I think it is the 1370... old analog, small box. I thought of that, but Im trying to find the adjustment to increase exposure... it's an overall dark image caused by generic toner.

[bejoyjohn]

Re: Old Toshiba 1307 analog; DARK copies

05 and start and for manual its 1 and for auto exposure it is 5 or 7. try this and when you try the number it will show you what is being adjusted

[Mr Spock]

Re: Old Toshiba 1307 analog; DARK copies

adjustment.jpg