F110 on Estudio 355

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Petercwn
    • Jun 2025

    #1

    [Error Code] F110 on Estudio 355

    Can anyone help me with this ? I sold the machine overseas, and a red error light is on with the a/m code....help much appreciated...
  • ss12
    Trusted Tech

    250+ Posts
    • Jul 2008
    • 289

    #2
    Re: F110 on Estudio 355

    Originally posted by Petercwn
    Can anyone help me with this ? I sold the machine overseas, and a red error light is on with the a/m code....help much appreciated...
    wrong advice before,F110 scanner cpu problem.Try updating the firmware before replacing the scanner pcb

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      Re: F110 on Estudio 355

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

      Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

      Paul@justmanuals.com

      Comment

      • Petercwn

        #4
        Re: F110 on Estudio 355

        Thanks for the help above, trying the reload....they keep talking about a jig that is needed, any ideas what that may be ?

        Comment

        • ss12
          Trusted Tech

          250+ Posts
          • Jul 2008
          • 289

          #5
          The jig is a small pcb pre-programmed with the relevant firmware.this will force update the software,but is only available through authorised toshiba dealers.the machine can be updated via a USB stick but I would still recommend you get a trained tech to do this should problems arise

          Comment

          • Petercwn

            #6
            Re: F110 on Estudio 355

            again, many thanks - much appreciated...have a great weekend :-)

            Comment

            Working...