e-Studio 16 maintenance/drum

[birooprema]

I have e-Studio 16 and tell me maintenance/drum.

What must to do to reset this masage without changing drum image?

[Sbarro]

Try just (08) 251 or 340 or 401

[MSHADroo]

the drum life for this copier is 27000
you can reset the counter of drum whit [0] [8] [power] and then 673 to reset

[Sbarro]

Yeah i forgot ) 673 is the code

[just a tech]

here's a word document i made up once for the reset procedure on that family of models.. however, i have to say that i do recommend replacing drum and blade if it has actually been 27,000 copies since last changing..nothing more aggravating (and embarrassing) than going to a service call for copy quality issues due to drum after just visiting it recently and resetting drum count without replacing after p/m count was reached.. hope the document helps..good luck

[Go_Demons]

E studio problem paper stopping just after drum near duplex

Hi,

I have an E studio 16 and the copy is always stopping at the same point. The error refers to the duplex and when we open up that area the paper end is sitting just above the drum.

Any solutions?

Thanks

[Sbarro]

Check paper sensors.

[jcsll]

Toshiba E Studio Drum Reset

Thank You for the procedur to reset the drum message, But as soon as I cleared it I now get `Time for Maintenance`. Can I clear this the same way?

[MSHADroo]

Reset Drum Counter

hi dear friend
for reset the drum counter of e-studio16 you must:
1-power off
2-press and hold 0 , 8 keys
3-power on
4-after beep release keys
5-type 673
6-press ok button
7-power off
8-power on

goodluck

[jcsll]

E Studio 16 Maint. Reset

What is procedure for clearing or reseting Maintenance Message. I just installed drum and cleared that message but now have maintenance message. Thank You, John

[Harry]

Hi Jcsll
Have to reset the maintenance counter 08 252 to 0
check also 08 251 it is the maintenance copycounter after appears the maintenance pop up
A nice day at all