Well guy, been working on Toshiba 15 years and I've hit one of those "make me look like a rookie" jamming issues. Customer running 11 x17 saddle stitsc booklets..The jam look like a duplex jam, but the code is EAB0 "finisher jam".. I undersand what the manual is saying, but no success. Anyone had to deal with EAB0 ?
-
-
Re: E4520c / EAB0
Try swapping around the sensors in the bridge unit -
Re: E4520c / EAB0
Hi!
I got a customer with an 2540c with the same error code as you. It doesn't matter if I copy or print with finishing or without, I get the code anyway.
It rarely happens but when it does it's always when the last paper from the copy or print job is finished.
Did you try swapping the sensors in the bridge unit? If so, was it any different?Comment
-
Re: E4520c / EAB0
I tried swapping the bridge-unit with another one I had laying around that I know is working, no difference.
I'm going to change the MJ-1106 with another I have laying around to see if that helps.Comment
Comment