toshiba touch panel problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • maj143
    Technician

    50+ Posts
    • Nov 2007
    • 55
    #1

    toshiba touch panel problem

    hi all
    i have copier ST 355 the touch panel not working good is there any adj for the panel
    please let me know ... help me on that
    Tags: None
    • emujo
      Field Supervisor

      2,500+ Posts
      • Jun 2009
      • 3009
      #2
      Re: toshiba touch panel problem

      08/692 was the code for the previous toshiba models..not sure if they have changed this, but you can certainly try...Emujo
      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        • Hansoon
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Sep 2007
          • 3385
          #3
          Re: toshiba touch panel problem

          Same problem for Toshiba

          http://www.copytechnet.com/forums/ra...nce-again.html

          Hans
          “Sent from my Intel 80286 using MS-DOS 2.0”

            Comment

            • Gregg
              #4
              Re: toshiba touch panel problem

              I pretty sure the calibration is in the user or admin function on these now.

                Comment

                • maj143
                  Technician

                  50+ Posts
                  • Nov 2007
                  • 55
                  #5
                  Re: toshiba touch panel problem

                  i try what EMUJO say and it work tell now so thanks every one for help

                    Comment

                    Previous template Next
                    Working...