e-studio 20 password reset on web

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hrichards
    • Jun 2025

    #1

    e-studio 20 password reset on web

    Hi, We have about 6 of these units that we just received off lease and I am trying to configure the web page, but it asks for a password. I have tried just about every password I could find on here pertaining to the e-studio series, but it doesn't seem like anyone is as low as the "20", they are all 3 digit models.

    I also tried the D test mode, 263, and that seems to be an invalid registry, it's blank.

    I factory reset wit hthe 1,3 * command. I even cleared 08-360 to 0 (was 27000).


    Also, email setup and scanner setup are grayed out on the program menu on the machine.
  • hrichards

    #2
    I still don't have access to the system. I thought I would throw a few other numbers out there. The e-studio 20 is what is on the web page. The copier has e-studio 200 on the front face.

    Hope this helps.

    Thanks!

    Joe

    Comment

    • Mr Spock
      Vulcan Inventor of Death

      1,000+ Posts
      • Aug 2006
      • 2064

      #3
      The password should be 12345 or 123456 or password or blank.
      They are both the same basic machine (e20 and e200) the 200 is just the newer version. There are two network options on this model one "supports" scan (via the Toshiba viewer only program) and the other is a print only card.
      And Star Trek was just a tv show...yeah right!

      Comment

      • Sbarro
        Trusted Tech

        100+ Posts
        • Feb 2008
        • 176

        #4
        The password is "sysadm".
        "A process cannot be understood by stopping it. Understanding must move with the flow of the process, must join it and flow with it"

        "
        What do you despise? By this you are truly known"

        Guess who

        Comment

        • hrichards

          #5
          Thank you all. The password works and so does the printing from the computer.

          Comment

          Working...