help me - E35 - show code C94

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • aalex_bom
    Trusted Tech
    • Jan 2008
    • 214

    #1

    help me - E35 - show code C94

  • jawir
    Trusted Tech

    100+ Posts
    • Aug 2007
    • 107

    #2
    Hi,

    Here I have some step for you to follow.

    1. turn it off the machine and turn it on again if the error displayed gone, leave it and see what happened
    2. if no, check the circuit pattern beween main CPU and MROM is short or opened circuit.
    3. Replace the LGC Board if this error occurs frequently.


    rgds and good luck!

    Comment

    • aalex_bom
      Trusted Tech
      • Jan 2008
      • 214

      #3
      thank for your help

      i have not LGC Board, what other away??
      WHERE IS MROM ????

      Comment

      • aalex_bom
        Trusted Tech
        • Jan 2008
        • 214

        #4
        detail

        i go into particular s, i turn on copier, please waitting screen show "ready " okey.

        sometime:when i press "start"/"Print", fuser begin run and feeder load paper but upto registration roller and stop but fuser continue running.
        sometime: when i press "start"/"Print" the copier appear C94.
        sometime: the copier printed 1-2 papers,but some second appear erro.

        Comment

        • Sbarro
          Trusted Tech

          100+ Posts
          • Feb 2008
          • 176

          #5
          It's the "Main CPU is abnormal" what you expect ??

          1. Check if the circuit pattern between the main CPU and MROM is short- or open-circuited.
          2. Replace the LGC board if this error occurs frequently.

          Main ROM
          There is no other way.
          "A process cannot be understood by stopping it. Understanding must move with the flow of the process, must join it and flow with it"

          "
          What do you despise? By this you are truly known"

          Guess who

          Comment

          • aalex_bom
            Trusted Tech
            • Jan 2008
            • 214

            #6
            thank you

            Comment

            • aalex_bom
              Trusted Tech
              • Jan 2008
              • 214

              #7
              good with other idea

              i repaired Power Board.
              Problem is it, a bit IC was fail.
              now my copier running very good.
              thanks

              Comment

              • Sbarro
                Trusted Tech

                100+ Posts
                • Feb 2008
                • 176

                #8
                I see that Power Supply is very often a reason for errors.
                A week ago i had E160 with C41/C44 all the time.
                Power Supply of course was broken
                "A process cannot be understood by stopping it. Understanding must move with the flow of the process, must join it and flow with it"

                "
                What do you despise? By this you are truly known"

                Guess who

                Comment

                • aalex_bom
                  Trusted Tech
                  • Jan 2008
                  • 214

                  #9
                  No accuracy

                  Originally posted by Sbarro
                  I see that Power Supply is very often a reason for errors.
                  A week ago i had E160 with C41/C44 all the time.
                  Power Supply of course was broken

                  uhh, i found that, Almost, Toshiba's Copier appear errors with the fewest accuracy for every detail .

                  Comment

                  • Sbarro
                    Trusted Tech

                    100+ Posts
                    • Feb 2008
                    • 176

                    #10
                    I can't say , i'm working only(98&#37 with Toshiba's
                    "A process cannot be understood by stopping it. Understanding must move with the flow of the process, must join it and flow with it"

                    "
                    What do you despise? By this you are truly known"

                    Guess who

                    Comment

                    • aalex_bom
                      Trusted Tech
                      • Jan 2008
                      • 214

                      #11
                      oh, good luck to you

                      Originally posted by Sbarro
                      I can't say , i'm working only(98%) with Toshiba's

                      Comment

                      Working...