Toshiba estudio350

[Melake]

Please Help,

I had F100 error code and replaced HDD, I coud not find the Firmware for this model at all. any help some where ? Thanks

[metrombs]

I have the same problem. Were you able to solve yours. Let me know.

Thxs,
Rad

[jsyblade]

I have a copy of UK VERSION 350/450 firmware here if you would like it. 35 meg in size, best way to send would be Via msn messenger or skype. I am a Toshiba agent so should be able to get the US version for you

[mac12681]

Can someone help me get the firmware for my toshiba estudio 350

[TheOwl]

With F100 errors, you can sometimes recover from them using an 08 code that rebuilds the database on the HDD.

Look for it in the service manual and you might be able to get your old HDD going again. It won't help with not having firmware though.

[mac12681]

do you happen to know how I can get the firmware

[emujo]

Once you replace the drive, it must be partioned, formatted and firmware reloaded. There is no (authorized Toshiba) way around this. Firmware is propriatary info and is not accessable by non Toshiba techs. As it is a large file, standard email will not work. Someone would have to be willing to "usend" or post it on an FTP server ect for you to get it. Emujo

[mac12681]

Do you know anyone willing to do that

[mac12681]

Does the copier format it automatically after I put it in or how would I do that and does anyone know what jumper setting am I supposed to be on? Please help...finally got the firmware need to finish this I want to be through with this

[CT Copier Repair]

Should have called a tech
without firmware its a boat anchor
what do you have to trade for firmware?

[rav555]

It would helpful to get a update mac12681 on how did you get the firmware, and if you got the drive partitioned properly??

[TheOwl]

The machine won't Partition and Format the HDD automatically, these need to be done through Assist Mode and 08 mode respectively.