e-studio 603 jam E410

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mohamed983
    Junior Member
    • Feb 2012
    • 6

    #1

    [Jamming] e-studio 603 jam E410

    i have mpf e-studio 603 since two days after coping when press start to copy another order it jam code E410 afther open front cover and closed it jam eding what can I do ?
  • canonbundy
    Senior Tech

    500+ Posts
    • Jun 2012
    • 607

    #2
    Re: e-studio 603 jam E410

    Originally posted by Mohamed983
    i have mpf e-studio 603 since two days after coping when press start to copy another order it jam code E410 afther open front cover and closed it jam eding what can I do ?
    Did you buy a Truckload of these gadjets? I replied to your same question 6 hours ago.

    Comment

    • sagar4
      Trusted Tech
      • Dec 2012
      • 127

      #3
      Re: e-studio 603 jam E410

      Originally posted by Mohamed983
      i have mpf e-studio 603 since two days after coping when press start to copy another order it jam code E410 afther open front cover and closed it jam eding what can I do ?
      [E410] Front cover open jamIs the front cover open?

      YES Remove the paper if there is any, then close the cover.
      NO
      Is the voltage of 24V being supplied from the power supply unit?
      (Perform the input check in the test mode: 03-[FAX] ON/[9]/[H])
      lllllll

      NO
      1) Check if the connector for 24 V power supply is disconnected.
      2) Check if the connector CN344 on the LGC board is disconnected.
      3) Check if the connector pins are disconnected and the harnesses are
      open circuited.
      4) Check if the conductor pattern on the LGC board is short circuited or
      open circuited.
      5) Replace the LGC board.
      YES
      Replace the LGC board.
      "Broken again"

      Comment

      Working...