E 280 jamming and wrinkling first page only

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • yormets
    Trusted Tech

    250+ Posts
    • May 2009
    • 336

    #1

    E 280 jamming and wrinkling first page only

    This Toshiba has morning sickness. Every morning it jams the first copy in the fuser area when feeding letter from the upper paper tray. It's fine for the rest of the day. Until the next morning, it jams the first copy. So I changed the letter paper to the bottom tray and now it wrinkles the first copy in the morning. Then fine the rest of the day. That went on for two months. Now it has started jamming the first copy from the bottom tray also. It appears to me to be an overfeed problem, but from what? The registration of the jammed or wrinkled prints are fine. Somewhere between the registration rollers and the fuser the paper is not going through the fuser fast enough. I tried a new fuser assy. Same result. It is so hard to troubleshoot because it only happens once each day in the morning. Any ideas where to start?
  • toner lungs
    Technician
    • Jan 2013
    • 10

    #2
    Re: E 280 jamming and wrinkling first page only

    On some of the Toshibas I have had to adjust the exit motor speed. You've got nothing to lose by giving it a try I suppose.

    Comment

    • emujo
      Field Supervisor

      2,500+ Posts
      • Jun 2009
      • 3009

      #3
      Re: E 280 jamming and wrinkling first page only

      This is a pretty old box...I would start with paper feed and transport clutches...also a detailed look at the registration actuators (nicks and cuts) and thorough cleaning of their associated sensors might be in order...The verticle feed roller might be getting a little thin...Emujo
      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

      Comment

      Working...