Maintainence Reset

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • scobo65
    Technician
    • May 2012
    • 13
    #1

    Maintainence Reset

    Hi, we have a Okidata CX-1145 that is the same as aToshiba e-studio 451c and I need the procedure to reset the "Time For Periodic Maintainence" message.
    I'm having trouble getting the correct info from Oki. Thanks.
    Tags: None
    • Aethanite
      Service Technician
      • Oct 2012
      • 42
      #2
      Re: Maintainence Reset

      If it is indeed the same, then you need to enter 08 mode by holding down the 0 and 8 keys when you switch on the machine. Clearing code 252 will do it.

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          Re: Maintainence Reset

          This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

          Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


          Paul@justmanuals.com

            Comment

            • michaelc
              Field Tech

              Site Contributor
              500+ Posts
              • Mar 2011
              • 590
              #4
              Re: Maintainence Reset

              Remember to reset counters for parts which you have changed in pm support also. Wont reset the pm counter for the display message but will help the iqc.
              It didn't say that I couldn't do it in the manual.

                Comment

                • didi2005
                  Trusted Tech

                  250+ Posts
                  • May 2011
                  • 401
                  #5
                  Re: Maintainence Reset

                  U can also edit the 08-251 for the PM counter value, by default is 120,000.

                    Comment

                    Previous template Next
                    Working...