Reboot the machine after printing on esudio 720

[nhatthuc0000]

I HAD PROBLEM ON TOSHIBA E720, COPIER APPEAR ON DISPLAY "REBOOT THE MACHINE " AFTER PRINTING FORM PC WITH WIN7.
I USED TCP/IP PROTOCOL INSTALL PRINTER PCL6
http://business.toshiba.com/download...cl6-v44980.zip
CAN YOU HELP, THANKS.

[Mr Spock]

Re: Reboot the machine after printing on esudio 720

Check the hdd and make sure firmware is up to date.

[nhatthuc0000]

Re: Reboot the machine after printing on esudio 720

Check the hdd and make sure firmware is up to date.

i re installed FW, T390SY0U329 M-ROM is M-14 S-ROM is S-05, format HDD, 690 - 2
before Up date I run
C+3, 1,2 and 3

but Error not run out

[Mr Spock]

Re: Reboot the machine after printing on esudio 720

i re installed FW, T390SY0U329 M-ROM is M-14 S-ROM is S-05, format HDD, 690 - 2
before Up date I run
C+3, 1,2 and 3

but Error not run out

Then you will most likely need a new hdd. I think this will take anything from 40gb up to 120gb without issues. then re-do the steps above.

[michaelc]

Re: Reboot the machine after printing on esudio 720

punch the machine, just below the toshiba sign so you get in in the vitals. will make the machine cooperate more easily.

[aalex_bom]

Re: Reboot the machine after printing on esudio 720

let replace new HDD, so I was then