Toshiba e-STUDIO 283 Error C580

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jedenco
    Technician

    Site Contributor
    • Nov 2007
    • 39
    #1

    [Error Code] Toshiba e-STUDIO 283 Error C580

    Hello,

    Customer's machine will randomly throw a C580. I've already replaced the IPC board and finisher controller board as the service handbook says to do but the machine still randomly throws code. Is there anything else that could be causing this issue? Im thinking the logic board but id have to order one since i dont have one on hand to swap and see. Any tips would be appreciated!

    Thanks,
    J
    Tags: None
    • dbrownlee
      Trusted Tech

      100+ Posts
      • Sep 2005
      • 197
      #2
      Re: Toshiba e-STUDIO 283 Error C580

      Have you checked or replaced the harness from the copier to the finisher?
      GO TIGERS!!

        Comment

        • Acme
          Trusted Tech
          • Jan 2013
          • 155
          #3
          Re: Toshiba e-STUDIO 283 Error C580

          08-1912 0 to 1 or vice versa?

            Comment

            • michaelc
              Field Tech

              Site Contributor
              500+ Posts
              • Mar 2011
              • 590
              #4
              Re: Toshiba e-STUDIO 283 Error C580

              Have you updated the machine and finisher firmware ?
              It didn't say that I couldn't do it in the manual.

                Comment

                Previous template Next
                Working...