If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a Toshiba e Studio 2820C with CEC0 error. I've changed transfer belt second transfer roller. Apparently the one way clutch needs to be changed. Any idea where that's located any help will be appreciated.
Remove back panels, unscrew the cage swing this out the way, there is a stepper motor in front of you that drives reg roller and second transfer remove this unit 4/5 screws then the white gear is on a little shaft.
Hope this helps.
Remove back panels, unscrew the cage swing this out the way, there is a stepper motor in front of you that drives reg roller and second transfer remove this unit 4/5 screws then the white gear is on a little shaft.
Hope this helps.
Thank you I really appreciate you taking the time to reply. Ill give it a go and see what happens. Ill keep you posted
Remove back panels, unscrew the cage swing this out the way, there is a stepper motor in front of you that drives reg roller and second transfer remove this unit 4/5 screws then the white gear is on a little shaft.
Hope this helps.
recently i had same problem and solved thanks Mr. #sperman# thank you very much !
Comment