ISO OS for Toshiba e-studio 810

[Guest]

I have had to replace a hard drive in a Toshiba e-studio 810 and need all the operating software and drivers. If you know of a link where I could download them that would be much appreciated.

gharab

Mail
ghezoo@live.com

[ivovb]

Re: ISO OS for Toshiba e-studio 810

I suppose You are talking about GL-1020 HDD?! First of all You have to have CD drive (which is easy) and special cable to connect CD-drive to machine. If You have them PM me.

BR

[gharab]

Re: ISO OS for Toshiba e-studio 810

My HDD connected to FWB-F-BRG-559 board. this board has two IDE port that one connected to HDD & other don,t connect to any device.
This board has ethernet 10/100 , VGA, mouse and keyboard ports.
I have both IDE CD ROM/DVD drive & IDE cable.
thanks

[gharab]

Re: ISO OS for Toshiba e-studio 810

I have both IDE CD/DVD ROM drive & IDE cable

[gharab]

Re: ISO OS for Toshiba e-studio 810

My HDD connected to FWB-F-BRG-559 board. this board has two IDE port that one connected to HDD & other don,t connect to any device.
This board has ethernet 10/100 , VGA, mouse and keyboard ports.
I have both IDE CD ROM/DVD drive & IDE cable.
thanks

[HASSAN]

Re: ISO OS for Toshiba e-studio 810

My HDD connected to FWB-F-BRG-559 board. this board has two IDE port that one connected to HDD & other don,t connect to any device.
This board has ethernet 10/100 , VGA, mouse and keyboard ports.
I have both IDE CD ROM/DVD drive & IDE cable.
thanks

to solve it you can copy image from any good OS Hd .

[emujo]

Re: ISO OS for Toshiba e-studio 810

If it is the GL, simply disconnect the 2nd IDE cable running to the ports side, connect your CD drive IDE cable to this port, and connect the power to an open connector. Drop in the recovery CD and restart the controller. You can hook a monitor to the VGA port and watch the process, this will let you know if you have other issues besides a faulty OS. Emujo

[vinhsesco]

Re: ISO OS for Toshiba e-studio 810

If it is the GL, simply disconnect the 2nd IDE cable running to the ports side, connect your CD drive IDE cable to this port, and connect the power to an open connector. Drop in the recovery CD and restart the controller. You can hook a monitor to the VGA port and watch the process, this will let you know if you have other issues besides a faulty OS. Emujo

you can download link http://imaging.toshiba.co.uk/toshiba...RecoveryCD.zip
and link http://imaging.toshiba.co.uk/toshiba...itionCDROM.zip