Toshiba e-Studio 452 Networking

[ALYAFAEE]

Hi Guyz...


I really have big problem and hope that you guys can help me I bought recently Toshiba e-studio 452 I want to share it on my network so everyone on my network can print on it .... waiting for suggestion

[sdrawkcab]

Re: Toshiba e-Studio 452 Networking

Do you have the print enabler dongle fitted?

[ALYAFAEE]

Re: Toshiba e-Studio 452 Networking

thanks for replaying buddy ...

do I have to fit any dongle along with the printer I can ping the printer I can sent printing job but its not printing

[emujo]

Re: Toshiba e-Studio 452 Networking

The older B&W Toshibas have NICs built into the system board. You can input an IP address and communicate with the built in web page, but to print or scan you must install the enablers. There are 2 types; separate print/scan enablers (dongles), or combos that include both. There is a 60 day trial option that you can temporarily turn on. This site has some info on that. You can also make an offer and I'm sure someone will get back with you. Not too much need for these anymore, so don't get jacked on the price...New, they were around $600. I wouldn't pay more than $40-50 anymore. The 452 is about 1 year from being "Obsolete" so parts/supplies are going to be hard to find. Emujo