[Dead] e studio 203 big problem

[mhimdat]

i removed the SRAM. now the machine is not responding. what can i do to fix it ???

[thejack]

Re: e studio 203 big problem

re install the SRAM first (following steps the service manula).

[TheOwl]

Re: e studio 203 big problem

And you removed the S-RAM why?

[JustManuals]

Re: e studio 203 big problem

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[mhimdat]

Re: e studio 203 big problem

its ok i reset it by 1+2+3+* .
thanks mens.

[SOS]

Re: e studio 203 big problem

how can you reset. can you show us how? thanks

its ok i reset it by 1+2+3+* .
thanks mens.

[SOS]

Re: e studio 203 big problem

how can you reset sram? can you show us
thanks

[emujo]

Re: e studio 203 big problem

I think he means he did a 3/C-1, 2,3. Reset NVRAM Flags (not reset nvram) and then a partition delete and format. Now he needs HDD and UI firmware to get the MFP back up and running. I hate "tweakers". "Tweaker" old navy term for someone who messes with something they have absolutely no knowledge about and throw a whole system out of whack by doing it. Emujo

[Mr Spock]

Re: e studio 203 big problem

"Tweaker" old navy term for someone who messes with something they have absolutely no knowledge about and throw a whole system out of whack by doing it. Emujo

That makes me a big tweaker!!