How do you saddle stitch through the windows print driver"

[CRC2k]

Quick question.. I have a 311C w/ the s300 Firey.. In windows, I dont see an option to saddle stich. Under fininshing I just see Stapler "Corner or Double" I dont see the saddle stich option. I can saddle stitch when using the copier itself, just dont see the option when printing from my PC. Any ideas?? Is there somehthing I have to enable under the firey software?

Thanks
Chris

[nmfaxman]

Make sure the righ finisher is added to the main print driver.
It may not have the saddle stitch finisher added to the driver.

[CRC2k]

Make sure the righ finisher is added to the main print driver.
It may not have the saddle stitch finisher added to the driver.

Thanks for the responce. I do have it installed in the driver, just doulbe checked. But in the Stapler Options, Saddle Stitch isnt there. It just says "Doulbe or Corner"... Am I missing something? Is there another option I need to select? Or.. Possibly is there something that needs to be confirured in firey??

Thanks
Chris

[CRC2k]

Anyone??? I cant seem to figure this out!


Thanks

[Albert]

Reinstall the driver and enable sadle stitch in print options

[ToshibaTech]

Well this thread was almost 2 years old.