I have All my 203's doing the same thing. I have a pre-printed picture on the right side of the paper. Install paper face up in tray. I have one full page original on top and 1/2 page on second original (print to the left).
When doing 1 to 2 sided, if you do a set, then hit function clear to do another set, the copies of the second set come out with print over the pre-printed part and the second side upside down.
Any suggestions?
Latest firmware installed.
When doing 1 to 2 sided, if you do a set, then hit function clear to do another set, the copies of the second set come out with print over the pre-printed part and the second side upside down.
Any suggestions?
Latest firmware installed.
Comment