If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i have 233 and 283 firmwre. i tried to put the firmware it will giving a error code after updating f 100
what is the problem
Replace HDD, format using 3+Clear > Power On > 3 > Start/Enter, then reload F/W - 4+9 Power On, update ONLY SYS & HDD 1st then update Engine & Scanner etc - should be ok.
i have 233 and 283 firmwre. i tried to put the firmware it will giving a error code after updating f 100
what is the problem
HA!!!! Frimware. Emujo
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
Comment