If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Toshiba e-studio 2820c time for periodic maintenance
Re: Toshiba e-studio 2820c time for periodic maintenance
Power up holding down print and 6 this will display pm support mode required end of life parts will be highlighted replace required and clear each counter etc
Re: Toshiba e-studio 2820c time for periodic maintenance
Originally posted by stockman123
08 power on key in 9891 enter one shut off and back on
hold down 08 power on key in 9891 enter or start or print then key in 0 then print or start this will turn off all maintance counters we shut them off because if there on a mainance contract we do it as needed to get the most life we can out of the components
Comment